Replacing Carbon Brushes - Power Craft 75044 Gebrauchsanweisung

Replacing carbon brushes

Please check regularly that the carbon
brushes are in good order. If the carbon
brushes are worn down, they must be
replaced. Both brushes must be replaced at
the same time.
Unscrew the base plate (picture 2).
Stick a screwdriver through the blind plate
(23) and remove the cover over the carbon
brushes (picture 3).
Extract the worn carbon brush and put in a
new one (picture 4).
DK
NO
SE
FI
GB
DE
55