Tools Required; Parts List - RIDGID 250 Bedienungsanleitung

Operating Instructions
NOTE: This product is only intended for use inside a van, enclosed trailer or truck with metal cap.
• Electric Drill
• 5/16" Hex Driver Bit
• Phillips Screw Driver
• Ruler
(1) Cord guide
(4) Strut channel nut
(2) Stop plate
(1) 1.25 OD Washer
(4) Hex head cap screw,
1/4 x 20 x 1
(20) Nylon lock nut, 1/4 x 20
(2) Carriage bolt,
1/4 x 20 x 1-1/2
To reduce the risk of serious personal injury, read and follow all instructions and warnings before installing or using this
product.
RIDGID recommends the Model 250 sliding ladder rack be installed in service or delivery vans equipped with a bulkhead.
A bulkhead divider between cargo and driver/passenger compartment reduces the likelihood material will come forward and
cause personal injury during a vehicle accident.
GB
www.ridgid.eu/jobsitestorage

TOOLS REQUIRED

PARTS LIST

(24)1/4" Flat Washer
(1) Pan head machine
screw, 1/4 x 20 x 7/8
(2) Shock cord
(4) Lock washer
(1) Adjustable mount
(1) Fixed mount
(1) Adjustable arm
–ATTENTION–
Ridge Tool Company
SLIDING LADDER RACK
LADDER RACK
• 7/16" Wrench
• 7/16" Deep Well Socket
• Ratchet Wrench
• Lithium Grease
(1) Front cradle
(1) Inside side catch
(1) Outside side catch
(1) Fixed catch
(17)Carriage bolt,
1/4 x 20 x 3/4
(1) Safety cable assy.
(3) Rail
WARNING
SLIDING
MODEL 250
(2) Connecting bracket
(3) Mounting bracket
(1)Vinyl cap
(8) 1/4 x 14 self drilling
screw
(1) Rear mounting bracket
Tools For The Professional
TM
1