Device Installation - IMOU Ranger serie Kurzanleitung

Figure 3-1
Note
- If you have more cameras, please follow step 4 to add them one by one.
- If you want to change the Wi-Fi signal, please reset the camera to factory default
and repeat step 4 to add the camera.
4

Device Installation

Note
Please make sure the mounting surface can sustain at least 3X weight of the
camera.
Step 1 Dig holes on the proper mounting surface according to the hole sites of
installation position map.
Step 2 Knock the expansion bolts into the holes.
Step 3 Use self-tapping screws to install quick installation board and fix it well.
Step 4 Connect the device to power.
3