Operation By Imou App - IMOU Ranger serie Kurzanleitung

Note
To reset, long press for 10 seconds till the light is off; to enable WPS, just press the
button.
Please refer to Table 2-1 for more details about status of indicator light.
Indicator light status
Red light stably on
Green light slow flashing
Green light quick flashing
Green light stably on
Red and green lights flash
alternately
Red light slow flashing
Red light quick flashing
3

Operation by Imou App

Step 1 Power on your camera with power adapter.
Step 2 Connect your smartphone to your Wi-Fi network, scan "Imou" QR on the
packing box, download and install Imou App.
Step 3 Run Imou App, and register account for first use.
Step 4 Follow the steps below to add your camera (Figure 3-1).
Device status
Booting
Booting completed, await Wi-Fi config, enter smart
config status;
Wi-Fi smart config in progress, including WPS (Wi-Fi
Protected Setup), management frame, etc.
Wi-Fi connection succeeded, operate normally.
Device upgrade
Network disconnection
Device fail to boot up; SD card does not work
Table 2-1
2