Bluetooth® Pairing; Listening To The Radio; Aux Input - Boost -TOWER100 Bedienungsanleitung

3. Select the input source among USB, TF, BLUETOOTH, FM,
LINE IN
4. VOL+: Press to increase the volume
5. VOL-: Press to decrease the volume
6. : Press to select previous song/previous station
7. : Press to select next song/next station
8. : Press to play/pause music from USB/TF/BLUETOOTH
input source
In FM mode, press to enter auto search and auto store stations.
Operating Instructions
Connect the AC adaptor on the back of the appliance and into an outlet.
•
When using either the AC adaptor, first press power button on the back of the
•
unit to the ON position prior to use
• Switch on the speaker and press MODE button to choose Bluetooth® status, the
LED indicator will flash quickly.
• Search and connect the Bluetooth® appliance BTOWER on your phone or
laptop, the password is 0000 if necessary.
• After successful pairing, the LED indicator will flash slowly
• Press MODE button to choose FM mode, the LED indicator will flash in green
• Press on
stations will be searched and then stored in memory automatically.
Press or
•
• Insert the USB key or micro SD card on the speaker and press MODE button to
enter into MUSIC mode.
Press VOL+/VOL- button to adjust the volume
•
• Press or
• Press on
• Press MODE button to choose AUX IN status. The LED indicator will flash in red.
• Use an Aux cable (included) with one 3.5 mm stereo plug on each end of the
cable.
• Plug one end into the AUX jack on the main unit and plug the other end of the
cable into the Line-out or Headphone Jack of your external audio appliance
©Copyright Lotronic 2018
TURNING THE UNIT POWER ON/OFF
BLUETOOTH® PAIRING

LISTENING TO THE RADIO

button on the speaker or on the remote control, all available
button to select 20 presets.
USB/SD PLAY
button to choose your music
button to choose play/pause status.

AUX INPUT

BOOST-TOWER100 5