Philips HQ8174CC Bedienungsanleitung Seite 17

The shaving unit may not be placed correctly.
,
Put the shaving unit back onto the shaver by
inserting the hinge into the slot in the rim of the
hair chamber. Then push the shaving unit home
until it locks into place ('click').
4 Why is the shaver not entirely clean after I
have cleaned it in the washing machine?
The cleaning fluid in the cleaning chamber may
,
be soiled. Empty and rinse the cleaning chamber.
The cleaning fluid level may be too low. If the
,
fluid volume in the cleaning chamber drops
below the minimum level during the cleaning
program, the program is aborted. The cleaning
light flashes with intervals and the holder
returns to its starting position. Refill the
cleaning chamber with cleaning fluid up to the
MAX indication (see chapter 'Cleaning and
maintenance').
5 Why does the washing machine not work
when I press the start button?
The washing machine may not be connected to
,
the mains. Put the appliance plug in the washing
machine and put the powerplug in the wall
socket.
There may not be an electrical connection
,
between the washing machine and the shaver.
Open the lever and close it again until the
charging light on the washing machine starts to
flash.
EnglisH
19