Mounting On The Camera - Rollei L-Winkel Bedienungsanleitung

Mounting on the camera

8 1. Clean the bottom of your camera before installation.
2. The L-bracket for the Nikon Z6/Z7 can only be mounted in one direction so that the
vertical rail is on the right side of the camera when you look at the camera from the
front (as shown in the picture).
3. Make sure that the safety pin is inserted into the recess provided on your camera.
This ensures that the L-bracket is correctly positioned.
4. Use the enclosed Allen wrench to connect the L-bracket to the camera.
Then tighten the screw.
5. Make sure that the L-bracket is firmly attached to your camera.
Your camera with L-bracket is now ready for use.
ENGLISH
Camera
connections compartment
Battery