Panasonic ER‑GY60 Bedienungsanleitung Seite 15

Trimming height comb attachment
• The digit on the attachment indicates the target
trimming length.
• Actual beard or hair length will be a little longer than
the height you set.
• The desired results may not be achieved if beard or
hair is too long.
• In this case, trim the beard or hair to a length of
about 20 mm before using the appliance.
• Beard or hair will be easy to accumulate in the
attachment when a lot of beard or hair is cut. When
this happens, clean the attachment.
(See pages 16 and 17.)
1
Turn the dial and adjust the trimming height
indication mark (
) to the desired height.
b
BEARD → for trimming beard
b
BODY → for trimming body hair
Trimming height :
• approx. 0.5 mm to 10 mm
Trimming height :
• approx. 3 mm to 12 mm
2 Apply the flat part of the comb against your
skin and cut your beard or hair by combing it
left and right.
* Illustration is Trimming height comb attachment for
beard.
Detail trimming attachment
Trimming beard
• Use the attachment for trimming narrow areas and
for detailed trimming.
Place the blade horizontally
against the skin and
towards the beard line trim
slowly.
Trim gradually from the
ends by bringing the blade
in contact with the skin.
Flat part of the comb
15