Revision; Destruction; Checklist For Malfunctions And Problems; Warranty - Terrier TSCC Gebrauchsanleitung

8

REVISION

At least once (1x) per year, or if the clamp becomes damaged, it must be inspected, tested
and revised by Terrier Lifting Clamps B.V. or other authorised revision company, if necessary.
9

DESTRUCTION

At the end of its working life, the clamp can be treated as scrap iron, as long as it is ren-
dered unusable first.
10

CHECKLIST FOR MALFUNCTIONS AND PROBLEMS

Malfunction/problem
Fastening hinge is too stiff
Housing bent
Fastening is oval
Spindle turns stiffly
Spindle bent
Split pin missing
Clamp opens/closely stiffly
11 5 YEAR WARRANTY
Terrier Lifting Clamps B.V. offers end users a 5 year warranty on the lifting clamps.
This warranty is limited to the original end user of the hoisting equipment and is subject
to the equipment being inspected, controlled and maintained according to the producer
and dealer instructions throughout the warranty period. The warranty period is 5 years
from the purchase date and is subject to the conditions and measures given here.
11a CONDITIONS
The warranty only covers defects in the hoisting equipment resulting from manufacturing
errors arising during normal use. The warranty does not cover wear to components such
as pivots, cams, tensioning springs, etc. If a defect occurs within this warranty period, the
lifting equipment will be replaced or repaired as the producer thinks fit.
No warranty is given for clamps in which defects occur due to:
- Regular wear and tear.
- Overloading.
- Incorrect and/or rough use.
- Damage.
- Non-compliance with procedures and measures.
- Lifting materials other than those shown on the clamp or in the user manual.
- Modification/adaptation of the Terrier clamp.
- Improper use of the clamp, and non-compliance with any instructions given in the user
manual in question.
- Maintenance and/or revision work not being carried out by an authorised Terrier dealer.
12
Possible Cause
Clamp overloaded
Clamp overloaded
Clamp overloaded
Clamp overloaded
Clamp overloaded
Incorrect installation
Clamp overloaded
Action
Reject clamp
Reject clamp
Reject clamp
Reject clamp
Reject clamp
Fit a new one split pins
Reject clamp