Identification Of The Product - Daikin EKOMBG22ABV1 Installationsanleitung

These installation instructions
With these installation instructions, you can safely assemble, install and maintain the
unit. Carefully follow the instructions.
In case of any doubt, please contact the manufacturer.
Keep the installation instructions near the unit.
Abbreviations and terms used
Description
Daikin EKOMBG22ABV1, EKOMBG28ABV1 and
EKOMBG33ABV1 wall-mounted gas boiler.
Unit with piping for central heating
System with pipes for domestic hot water
Symbols
The following symbols are used in this manual:
CAUTION
Procedures which - if they are not carried out with the
necessary care - may cause damage to the product, the
surroundings, the environment or injury.
IMPORTANT
Procedures and/or instructions which, if they are not followed,
will have a negative effect on the functioning of the unit.
Service and technical support for the installer
For information about specific settings, installation, maintenance and repair work, as an
installer, please contact your local Daikin dealer.

Identification of the product

You will find the unit details on the data plate on the bottom of the unit.
The data plate contains, beside the supplier information and the boiler specification
(boiler type and model name) the following information:
******-yymm****** Product code-Serial No.
YY= year of production, mm = month of production
PIN Product Identification Number
Data related to Domestic Hot Water
Data related to Central Heating
Information regarding electrical power supply
Voltage, mains frequency, elmax, IP-class)
PMS Permissible overpressure in CH circuit in bar
PWS Permissible overpressure in DHW circuit in bar
Qn HS Input related to gross caloric value in kilowatts
Qn Hi Input related to net caloric value in kilowatts
Pn Output in kilowatts
BE, CH, DE, ES,
Countries of Destination (EN 437)
FR, GB, IE, IT, MT
I2E(s), I2H,
IIELL3P, II2H3P, Approved unit categories (EN 437)
II2Esi3P
G20-20 mbar Gas group and gas connection pressure as set at the
G25-25 mbar factory (EN 437)
B23, .... C93(x) Approved flue gas category (EN 15502)
Tmax Max. flow temperature in °C
IPX4D Electrical protection class
Daikin Europe NV
To be referred to as
Unit
CH installation
DHW installation
4