Kopp 840629041 Bedienungsanleitung Seite 29

GB
Several factors can affect the correct function of a motion sensor.
In the following, the most common faults, their causes, and elimination will be briefly explained.
Fault
Sensor does not switch on
Sensor does not switch off
No acoustic notification
Cause
Fuse defective
Sliding switch on OFF
Time setting is too long.
Motion sensor constantly triggers.
Incorrectly connected
"Acoustic" switch is on OFF
Elimination
Find and eliminate cause.
Replace fuse
Set sliding switch to AUTO or ON
Perform test mode
Check connection
Switch to ON mode
29