Modified Function For Switch S4 - Honeywell Esser SS90 Bedienungs- Und Installationsanleitung

26
Installation
•
Remove housing lid and power drill protection (if applicable)
•
Insert connection cable
•
Fix housing to the surface with 4 screws without any mechanical strain.
•
In the case of a cavity wall or flush mounted installation, read the
enclosed installation instructions.
•
When installation is completed, close the housing with the locking
screws.
The housing with the decorative frame is raised approx. 17mm
from the surface when the wall has been rendered.

2.2 Modified function for switch S4

In the default setting the key switch is delivered as a sustained
contact/switch with inserted clamp. If the key switch is to be used as a
momentary contact/non-locking key, remove the clamp.
Compress the spring and remove the clamp
Fig. 2: Modified function for switch S4
Clamp
S 4
Spring
Key switch SS90