Oki LD670 Benutzerhandbuch Seite 147

(2) Memory Switch setup items
№ Item
1 Power On Status
2 Receive Buffer
3
Busy Condition
4 Receive Error
5 Auto LF
6 DSR(#6) Reset
7 INIT(#25) Reset
8 INIT(#31) Reset
9 Cover Open Error
10 Return to Up
11 Return to Top Menu
Explanation
- Specifies reporting the power-on
state.
- Specifies the capacity of the receive
buffer.
- Specifies the printer BUSY
condition.
- Specifies how to handle receive
errors
- This item is valid only for the
serial interface.
- Specifies automatic line feed using
the CR code.
- This item is valid only for the
Parallel interface.
- Specifies the reset operation using
the DSR (#6) signal.
- This item is valid only for the serial
interface.
- Specifies the reset operation using
the INIT (#25) signal.
- This item is valid only for the serial
interface.
- Specifies reset using the INIT (#31)
signal.
- This item is valid only for the
parallel interface.
- Specifies how to handle a cover open
error during printing.
- Returns the menu to the selection
mode for setup group items.
- Returns the menu to the setup mode
menu.
146
Detailed setup item
Enable
Disable
45Byte
4KByte
Bufferfull
Offline/Bufferfull
Ignore
?Print
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Auto Recovery
Recovery by CMND
-
-