Inhaltsverzeichnis
Werbung
Option 2: Follow these steps to install the DNA
(D-Link Network Assistant) manually.
1. Insert the Utility CD into your CD-Rom Drive.
2. From the Start menu on the Windows desktop, choose
Computer.
3. Double click on your CD-Rom/DVD-Rom Drive to start
the autorun menu, or right click on the Drive to open
the folder. Select DNA (D-Link Network Assistant) and
double click on the setup.exe file.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Start > Programs > D-Link >
DNA and open the DNA (D-Link Network Assistant).
6. Just connect the Smart Switch to the same L2 network
segment of your PC and use the DNA (D-Link
Network Assistant) to discover the Smart Switches.
For detailed information of DNA, please refer the user
manual.
Connecting The Console Port
(depending on the purchased model)
To connect to the serial port, a special Console Cable
must be used. This cable is included with this product's
packaging. The cable referred to as an RS-232 to RJ-45
connector cable specifically pinned to connect to this
switch's serial port by using the correct pin configuration.
To connect to the console port of the Switch, use the
following steps:
1. Connect the RS-232 end of the console cable to the
Serial Port of the management PC.
2. Connect the RJ-45 end of the console cable to the
Console Port of the Switch.
3. Open the HyperTerminal application (or any terminal
emulation program capable of emulating a VT-100
terminal connection) on the management PC and
configure the Properies of this connection.
a.The Bits per second should be 115200 baud.
(baud rate setting depend on purchased models)
b.The Data bits should be 8.
c.The Parity should be None.
d.The Stop bits should be 1.
e.The Flow control should be None.
Figure 10. Hyperterminal Connection Properties
4
4. Now the Switch can be turned on and access to the
Switch's CLI will be available.
Telnet Management
Users may also access the switch through Telnet using
your PC's Command Prompt. To access it from your
computer, users must first ensure that a valid connection
is made through the Ethernet port of the Switch and your
PC, and then click Start > Programs > Accessories >
Command Prompt on your computer. Once the console
window opens, enter the command telnet 10.90.90.90
(depending on configured IP address) and press Enter
on your keyboard. You should be directed to the opening
console screen for the Command Line Interface of the
switch, leave "black" for the default user name and
password for the Switch and press the Enter key.
SNMP-Based Management
You can manage the Switch with D-Link D-View or any
SNMP-compatible console program. The SNMP function
is default Disabled for D-Link managed switches.
D-View SNMP Network Management System is a
comprehensive standard-based management tool
designed to centrally manage critical network. D-View
provides useful tools to allow network administrators to
effectively manage device configurations, fault tolerance,
performance and security. D-Link offers free D-View trial
version download that allows you to free evaluate the
products for 30 days. You can download the trial version
from http://dview.dlink.com.tw/support_Download_Trial_
Version.asp
Additional Information
If you are encountering problems setting up your network,
please refer to the User's Guide that came with the
switch. It contains many more rules, charts, explanations
and examples to help you get your network up and running.
Additional help is available through our offices listed at
the back of the User's Guide or online. To know more
about D-Link products or marketing information, please
visit the website http://www.dlink.com.
Warranty Information
The D-Link Limited Lifetime Warranty information
is available at http://warranty.dlink.com/
Werbung
Inhaltsverzeichnis
