Moon NOVA 80 Bedienungsanleitung

USER GUIDELINE
Thank you for choosing MOON headlight!
*For using this product safely and conveniently and keeping it
well-preserved, please read this manual carefully before using.
Please save this manual for future reference.
*Due to the improvement of the product, the product you bought may
not be exactly in accordance with the introduction of this manual. We
apologize for that.
SPECIFICATION
*1 pc CREE XH-G high brightness LED
*AA alkaline battery
*Water resistant (IPX 4)
*5 modes: Standard / High / Over drive / Flashing / Strobe
*Quick release handlebar mount (fits 22-31.8mm)
*High precision optical lens
*Side visibility
CONTENTS INCLUDED
Contents:
NOVA 80
*AA alkaline battery
*RB-07 (Handlebar bracket)
Optional accessories:
*RB-06 (Helmet mount bracket)
HEADLIGHT OPERATION
1. Press the power button to choose the modes:
In this method three modes are cycled.
Over drive
High beam
Standard
2. Fast press two times the power button to change into the strobe
and flashing modes.Fast press two times back to the first cycle.
Fast press
Over drive
2 times
High beam
Standard
5. Press and hold the on / off button around 0.5 seconds to turn off.
Power button
PRESS
Hold 0.5 sec
HOW TO MOUNT THE HEADLIGHT
®
1.Install the bracket onto handlebar by wrapping rubber strap around
post/bar and stretching strap around hook to secure.
2.Slide headlight forward onto bracket until it clicks into place.
3.Press down release lever to remove.
HOW TO MOUNT THE HEADLIGHT TO HELMET
1.Wrap belt around helmet and return the belt onto slotted space.
2.Twist screw knob clockwise until tight.
3.Slide headlight forward onto bracket until it clicks into place.
Power button 4.Press down release lever to remove.
INSTALL
PRESS
Power button
Flashing
Strobe
PRESS
Fast press
2 times
To adjust the vertical beam angle when mounted on the helmet,
loosen the screw knob and rotate the light up or down to your
preferred angle, then tighten the screw knob to secure the light in
place.
INSTALL
click
RELEASE
PRESS
RELEASE
LEVER
RUBBER
STRAP
click
PRESS
RELEASE
SCREW
KNOB
RELEASE
LEVER
BELT
BEAM ADJUSTMENT
To adjust the horizontal beam, spin the headlight left to right for your
best side to side beam angle. To adjust the vertical beam angle,
loosen the mounting and rotate the light up and down to your best
vertical beam angle, then tighten the mounting.
!
The beam is widely dispersed, besides its high brightness. To prevent
from blinding the oncoming vehicles on the public roads, you'd better
adjust the angle downward.
Mode Lumen Runtime
Standard 20 Up to 7 hour 25mins
High 40 Up to 3 hours 10 mins
Over drive 80 Up to 1 hours 50 mins
Flashing 40 Up to 7 hours 55 mins
Strobe 40 Up to 7 hours 35 mins
44° 11°
TOTAL ANGLE SPOT ANGLE
8 M
2 M
Side light
0.4 M
20 lux
210
0.2 M
840
Emax (LUX) Distance (M)
NONA 80
Weight
54 .8 g
10M
2M
1M
80
LUMENS