Polar W.I.N.D Gebrauchsanleitung Seite 7

•
If the 0.0 reading appears irregularly, this
may be due to temporary electromagnetic
interference in your current surroundings.
•
If the 0.0 reading is constant, you may have
exceeded 3000 riding hours and the battery
is empty.
Check speed
...
•
Make sure your speed sensor is positioned
correctly. Rotate the wheel a few times to
activate the sensor. The ashing red light
indicates that the sensor is activated. Also
the battery of your speed sensor may be
empty. For futher information, see Care and
Maintenance.
Sensor not found
...
displayed?
•
Press OK to start seeking.
...there are irregular speed, distance or heart
rate readings?
•
Electromagnetic interference, as well as
interference from other wireless training
computers, may a ect readings of speed,
distance and heart rate.
•
Disturbances may occur near high voltage
power lines, tra c lights, overhead lines of
electric railways, electric bus lines or trams,
WLAN base stations, car motors, bike
computers, some motor driven exercise
equipment, cellular phones, or when walking
through electric security gates.
Technical Speci cation
Operating
temperature:
Battery life:
Accuracy:
Material:
Water resistance:
is displayed?
Try again?
and
-10 ºC to +50 ºC / +14 ºF to
+122 ºF
Average 3000 riding hours
±1 %
Thermoplastic polymer
Splash proof
E N G L I S H
are
5