Polar W.I.N.D Gebrauchsanleitung Seite 6

E N G L I S H
Care and Maintenance
Keep the speed sensor clean. Clean it with a
mild soap and water solution and rinse o with
clean water. Dry it carefully with a soft towel.
Never use alcohol or any abrasive material such
as steel wool or cleaning chemicals. Do not
immerse the speed sensor in water.
Avoid hard hits as these may damage the sensor.
Speed Sensor Battery
Contact your authorized Polar Service Center for
a replacement of speed sensor. Polar recycles
used sensors. For more information on local
after sales services, consult the Polar Customer
Service Card.
Frequently Asked Questions
What should I do if...
...the speed reading is 0.0 or there is no speed
reading while driving?
•
Start searching for the data again by
pressing and holding the LIGHT button and
selecting
•
Make sure the position and distance of the
sensor to the magnet are appropriate.
•
Check that you have activated the speed
function in the training computer. For further
information, see Speed Sensor Teaching.
4
Seek sensor
.