Alarm Setting - Wiseup WIFI32 Bedienungsanleitung

10.1.4. Press the Set Button once again to save the day setting and the hour will start flashing.
Use the Up or Down Button to adjust the current hour.
10.1.5. Press the Set Button once again to save the hour setting and the minute will start flash-
ing. Use the Up or Down Button to adjust the current minute.
10.1.6. Press the Set Button once again to save the minute setting.

10.2. ALARM SETTING

10.2.1. When the clock camera shows the current time, press the Mode Button once to enter
into alarm setting.
10.2.2. Press the Up Button to turn on/off the alarm setting. The clock will show "--:--" when the
alarm setting is turned off, and vice verse, it will show "0:00".
10.2.3. When the clock shows "0:00", press the Set Button once and the hour will start flashing.
Use the Up or Down Button to adjust the hour.
10.2.4. Press the Set Button once again to save the hour setting and the minute will start flash-
ing. Use the Up or Down Button to adjust the minute.
10.2.5. Press the Set Button once again to save the minute setting. Then you can set the
snooze duration (1-60 minutes).
10.2.6. Press the Set Button once again to save the snooze duration setting. Then you can set
a desired one from 6 kinds of alarm songs.
10.2.7. Press the Set Button once again to save the alarm song setting. Then press the Mode
Button to exit the alarm setting.
10.3. 12/24-HOUR MODE SWITCH
When the clock camera shows the current time, press the Up Button to switch between 12-hour
mode and 24-hour mode.
10.4. TIME ANNOUNCEMENT
When the clock camera shows the current time, press the Time Announcement Button once
and the clock camera will speak out the current time.
10.5. THE NATURAL SOUND ENJOYING
10.5.1. When the clock camera shows the current time, press the Time Button once to set the
time of enjoying the natural sound (10-60 minutes) in any mode.
10.5.2. Press the Time Announcement Button for about 3 seconds to enjoy the natural sound.
And it will stop automatically when time is up.