Locking The Panel Heater On The Hanging Frame - Thermor Emotion digital serie Handbuch

LOCKING THE PANEL HEATER ONTO THE HANGING
Position the tilted panel heater on
1
brackets S1.
To unlock the panel heater from the hanging frame, take a flat-bladed screwdriver and
push the slider (located on the top left-hand corner of the hanging frame behind the appli-
ance) towards the wall.
Lift the panel heater while holding the slider in place with your screwdriver.
Tilt it forwards and then remove it from brackets S1.
FRAME
S1
Lower the panel heater onto the
3
hanging frame. A click tells you that
the panel heater is fastened and
locked in place.
33
Pivot the panel heater upwards and
2
lift it to position it on brackets S2.
CLIC
GB
S2