Herunterladen Inhalt Inhalt Diese Seite drucken

CODE HOMME ACT928821282 Bedienungsanleitung Seite 4

Rechargeable shaver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Name of components
1. Shaving head
2. Shaving head release buttons
3. On/off switch
4. Pop up trimmer
5. Indication lamp
6. Shaver power socket
Accessories
USB charging cable
Cleaning brush
Use
What to do before first use:
• Remove the packaging material and inspect the device for
damages.
• Do not operate the device if it is damaged in any way. Return
it to your seller immediately.
Charging the rechargeable battery
• Before first use, the shaver must be fully charged. • Slide the
On/Off switch in the Off position. • Insert the connector of the mains adapter into the power jack of the shaver. •
Plug the USB loading cable in an mains adaptor and plug it in a mains socket. • The indicator light will come on to
indicate charging. It will not go out when the battery is fully charged.
Intended use
• The hair must be clean and dry when being cut. • Only cut small amounts at one time. • Cut the hair with
progressively closer settings until you reach the desired length. • The cutting head will jam if you try to work too
quickly or try to cut too much hair at one. • Let the appliance run for a short lime before starting to cut. • Don't use
the shaver in case the shaving head is damaged as it may hurt your skin.
Shaving
• The hair must be clean and dry when being cut. • Only cut small amounts at one time. • The cutting head will jam if
you try to work too quickly or try to cut too much hair at one. • Switch the On/Off upwards to 'On' to turn the shaver
on. Let the appliance run for a short time before starting to cut. • Place the shaver head at 90°to the skin and move
it back and forth straightly and slowly against the beard growing direction.
Trimmer
1. Use the pop up trimmer for precise trimming of sideburns, moustache, neck hair or beard.
2. Slide the trimmer button upwards to push it out and switch the On/Off switch in 'On' position.
3. Lubricate the trimmer teeth every two months with a drop of sewing machine oil.
Cleaning
1. Make sure the shaver is turned off.
2. You are advised to clean the knife tool periodically to keep the shaver in good condition.
4

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis