Led Indication - Velleman VLEVP1 Bedienungsanleitung

LED Indication

no LED on
red LED on
green LED on
Remarks
 The VLEVP1 is only for use with 10440 - 14500 - 14650 - 16340 -
17335 - 17500 - 17670 - 18350 - 18490 - 18500 - 18650 - 18700
- 22650 - 25500 - 26650 3.6 V and 3.7 V Li-ion batteries.
Charging other battery types may be hazardous, and can damage
the batteries and charger.
 Keep the VLEVP1 away from water and excessive dust.
 Do not disassemble the VLEVP1 as damage may result.
 Do not use a damaged VLEVP1.
Tips
 Because of different battery types, capacities and over-charge
depths, the battery revive time may vary. Heavily over-discharged
batteries may not be able to be revived.
 To top up a battery with a voltage of 4.0 V or higher, insert the
battery first before plugging in an AC adapter (not incl.). If you do
the opposite, the charger may not charge the battery.
 It is recommended to remove the battery from the charger once
charging has completed. If the battery is left in the charger, the
charger will automatically restart the charging cycle when the
battery voltage drops below 4.1 V.
 The VLEVP1 has an integrated short-circuit protection. Note that
this protection only protects the charger but does not prevent the
battery from short-circuiting internally.
 Specifications and features are subject to change. Please find the
most recent description and specifications of the VLEVP1 on the
Velleman website.
V. 01 – 21/12/2015
VLEVP1
reversed battery polarity
battery being charged
battery being activated
short-circuit
charging completed
no battery inserted
poor connection
5 ©Velleman nv