Working; Emptying The Collection Tank - VLX 2180SR Bedienungsanleitung

Working

Sit correctly in the seat.
Turn the main switch to position "1".
Select the direction of travel with the direction selector.
Select the AUTO or ECO program.
separate operations.
Prewashing with brushes or pads:
Turn the main switch to position "1".
Select the AUTO or ECO program.
Press the suction motor button to stop suction.
the machine travels, the less detergent must be delivered.
Persist when washing particularly dirty points to give the detergent time to perform its
tive mechanical action.
Drying:
Lower the squeegee and with the suction motor on, pass over the same area washed pre-
viously. The result is equivalent to in-depth washing and subsequent ordinary maintenance
will take less time.

Emptying the collection tank:

If the tank is full, the display shows the corresponding alarm, see
seconds, the suction motor shuts down, then stop the machine and empty the tank following the
instructions shown below:
Take the machine to the disposal area.
Unhook the hose from the clip.
13
1
"Display
GB
-
alarms"; after a few
24