VLX 2180SR Bedienungsanleitung Seite 60

starts/stops the suction motor; outside of these programs, starts the suction motor in ma-
nual mode, lowering the squeegee.
programs, starts and stops (holding the button for two seconds) delivery of water/deter-
gent; outside of these programs, starts/stops delivery in manual mode. In the AUTO pro-
gram, the quantity of water/detergent can be adjusted by pressing the button; each time
the button is pressed, the set level increases, Lev1, Lev2,..... Lev Auto (delivery proportio-
nal to travel speed).
If the AUTO program is active, setting the delivery parameter will exit the program and
activate manual mode.
CHEM-DOSE (accessory): pressing the "water/detergent" + "brush" buttons together ac-
on the display, pressing the "+" and "-" buttons adjusts the level, from OFF to 0.2%, 0.3%
etc. up to 7%.
brushes; outside of these programs, starts/stops operation of the brushes in manual mode.
In the AUTO program, pressing and holding the button (for two seconds) activates brush
pressure adjustment mode; pressing the "+" and "-"buttons performs the adjustment, from
1 to 5 (VERSION WITH TWO BRUSHES ONLY). Setting the parameter exits the program
and activates manual mode.
and detach the brushes. Pressing the button once after starting the machine releases the
brushes, pressing it a second time activates automatic brush attachment. The button is
only active when all the functions are deactivated (suction motor and brushes); the same
button can be used to navigate the
12
1
2
3
4
5
: during operation with the AUTO, ECO or APC programs,
: during operation with the AUTO, ECO and APC
: inside the AUTO, ECO and APC programs, starts/stops the
"Technical Menu".
9 10 11
GB
used to automatically attach
.
8
7
6
22