Casals VSC65 Bedienungsanleitung Seite 4

clothes, jewellery or long hair can be caught in moving parts.
- If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
- Ensure that the resulting sparks not become dangerous,
for example, that they don't reach people or ignite flammable
substances.
- If it's necessary, use temperature-proof gloves.
- Use clamps or a vise to secure the object to be worked in
place. The work will be safer if both hands are free to control
the tool.
- Before using the appliance check the working speed shown
in the disc/ tool is equal or greater than the appliance's speed.
- Before using the appliance check the disc / tool dimensions are
compatible for this appliance.
- Before using the appliance ensure that the disc / tool is
properly fixed in place.
- Do not touch any of the appliance's moving parts while it is
operating.
- Protect yourself from contact with and the inhalation of dust
created by sanding wood and metal surfaces and surfaces
coated with lead paint. Use protective equipment that complies
with the appropriate health and safety regulations.
- Exercise precaution after employing the stop operation on the
appliance as the tool will continue moving from the effect of its
own mechanical inertia.
Power tool use and care
-Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed
-Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired
-Disconnect the plug from the power source and/or
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally
-Store idle power tool out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users
-Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools
-Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control
4
-Use the power tool, accessories and tool bits etc in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended could
result in a hazardous situation.
- Fully unroll the appliance's power cable before each use.
- Check the position of power cables before commencing work
ensuring they are well away from the work area.
- Do not use the appliance if the parts or accessories are not
properly fitted.
- Do not use the appliance if the accessories or consumables
attached to it are defective. Replace them immediately.
- Use the appliance handle/s, to catch it or move it.
- Disconnect the appliance from the mains when not in use and
before undertaking any cleaning task.
- Unplug the appliance from the mains before replacing any
accessory.
- Unplug the appliance from the mains when not in use and
before undertaking any cleaning task.
- This appliance is for household use only, not professional,
industrial use.
- This appliance is intended for adult use. Ensure that this
product is not used by the disabled, children or people unused
to its handling.
- This appliance is not a toy. Children should be supervised to
ensure that they do not play with the appliance.
- Do not expose the appliance to extreme temperatures.
- Take special care about discs and tools, they may be stored
fixed on the appliance and used according to the manufacturer's
instructions.
- Do not use separator or reducing bushings, adapters to fix the
discs / tools they are not directly compatible with the appliance.
- Keep the appliance in a dry, dust-free place, out of direct
sunlight.
- Always check the workpiece before operation and remove any
obstructions such as nails, staples, screws, string, rags, cloths
and other debris.
- Do not use the appliance on any part of the body of a person
or animal.
- Let the appliance running with no load for 30 seconds in a safe
position. If you notice serious vibration or other defects stop the
appliance immediately. Then check the problem and /or proceed
as we describe on Anomalies and Repair clause.
Service
- Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained
Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability null
and void.
- Any misuse or failure to follow the instructions for use
rende
and v
Circu
Cuttin
DA
blade.
tor ho
cut by
-Do no
protec
- Adju
Less t
the wo
- Neve
leg. S
to sup
bindin
- Hold
when
conta
wire w
and co
-When
guide
chanc
-Alwa
versu
mount
loss of
-Neve
blade
optimu
- Do n
- Only
over th
- Only
Kickb
- kick
misali
up an
- whe
closin
the un
- if the
teeth
surfac
kerf a
result
or co
preca