Clarke American Sanders 07073B Bedienungshandbuch Seite 7

Machine Set-Up
How to Install the Sandpaper
1. To install or replace abrasive, turn the machine
upside down and let it rest on the motor cover.
With the wrench supplied, remove the screw and
abrasive retainer. Hold pad to prevent it from
rotating and turn wrench. See fi gure 3
2. Center abrasive on pad and install the abrasive
retainer and screw. Tighten screw. See fi gure 4.
3. Return machine to upright position.
WARNING: Serious injury could occur when at-
tempting to replace abrasive while
machine is connected to power sup-
ply. Always disconnect power before
installing abrasive.
CAUTION: Gearbox damage could result from
machine resting upside down for ex-
tended periods of time. Lubricant may
drain from gearbox. Always return ma-
chine to upright position after installing
abrasive.
American Sanders Operator's Manual (EN) - B2
Clarke ®
ENGLISH
EN
Figure 3
Figure 4
FORM NO. 79001C - 7 -