Barco Eos Benutzerhandbuch Seite 73

Configuring the Visual Class
–--------------------------
A visual class describes the characteristics of a virtual colormap,
that has been or can be created for use a particular screen
The following visual class are supported.
1 - TrueColor
2 - DirectColor
Enter the Visual Class [1]: 1
IP address for engine 2 [192.168.1.2]:
Ethernet address for engine 2 [00.00.00.00.00.00]: 00.a0.c0.83.54.77
Screen arrangement for engine 2 (Width x Height) [2x4]: 2x2
Position for engine 2 (X,Y) [0,0]: 2,0
Graphic card type for engine 2
1 - "AGX-3000"
2 – "AGX-3281"
Enter the graphic card type
Configuring the Depth Resolution (Bit Per Pixel)
–----------------------------------------------
1 - for 8 bpp (256 colors)
2 - for 16 bpp (64K colors)
3 - for 8 and 16 bpp (MultiDepth/MultiColor feature)
Usable only for resolution up to 1400x1050
4 - for 32 bpp (16M colors)
Enter the Depth Resolution [3]: 2
Configuring the Visual Class
–--------------------------
A visual class describes the characteristics of a virtual colormap,
that has been or can be created for use a particular screen
The following visual class are supported.
1 - TrueColor
2 - DirectColor
Enter the Visual Class [1]: 2
These are your MLS Server settings
==================================
- Core machine's second IP:
- Engines Netmask Address:
- Operational mode :
- Number engines :
- Values for engine 1:
- Values for engine 2:
Everything correct? (yes/no)? [yes]:
Barco – Eos X Terminal – DOC-3061-0 – Benutzerhandbuch – Ausgabe 11 – November-2004
(read only visual)
(read/write visual)
[1]: 2
(read only visual)
(read/write visual)
192.168.1.254
255.255.255.0
Contiguous
2
IP = 192.168.1.1 Ether = 00.a0.c0.83.76.98
arrangement = 2x2
AGX-3281: Bpp = 16
IP = 192.168.1.2 Ether = 00.a0.c0.83.54.77
arrangement = 2x2
AGX-3281: Bpp = 16
position = 0,0
Visual = TrueColor
position = 2,0
Visual = DirectColor
______________________________________________________________
3. Inbetriebnahme
3-54