Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

9.
PS/2 Microsoft IntelliMouse Explorer
10.
Bus Mouse
11.
Unknown
12.
No Mouse
Enter a protocol number [7]: 8
Do you want to use the USB device (yes/no)? [no]: no
X11 Big Mouse Cursor
Insbesondere für große Bildwände kann es vorteilhaft sein, den Mauszeiger zu vergrößern. Geben Sie den
gewünschten Vergrößerungsfaktor an.
Configuring the Big Mouse Cursor
--------------------------------
When using the X Server with high resolution
the standard cursors are hard to track for some people.
Therefore you can define magnified mouse cursors.
Following magnification factors are available:
factor 1
:
factor 2..8
:
Enter the magnification factor [1]: 2
These are your Input Device settings
====================================
- Cursor size:
- Mouse Protocol:
- Mouse device:
Everything correct? (yes/no)? [yes]: y
Settings for the Output Devices
===============================
Please enter the required settings for
- Graphic Card Types (AGX-3000 or AGX-3281)
- Output Signal (analog or digital)
- Monitor Resolution (only for analog devices)
- Refresh Rate
- Screen Type (Multi Head or Multi Screen; only monolithic Server)
- Screen Arrangement (only monolithic Server)
Grafikkarte
Wählen Sie die Grafikkarte aus. E
Setting the Graphic card type
------------------------------
1 - "AGX-3000"
2 – "AGX-3281"
Enter the graphic card type [2]: 2

Output Signal

Wählen Sie die Art des Ausgabe Signals.
Configuring the output signal
---------------------------
1 - "Analog"
2 - "Digital"
Enter the output signal
Bildschirm Auflösung und Wiederholrate
Wenn Sie einen analogen Ausgang angegeben haben, muss die Bildschirmauflösung und die Wiederholrate
angegeben werden. Haben Sie gemischte analoge und digitale Ausgabe gewählt muss ausschließlich die
Wiederholrate für die analoge Ausgabe gewählt werden.
Barco – Eos X Terminal – DOC-3061-0 – Benutzerhandbuch – Ausgabe 11 – November-2004
standard cursors
magnified cursors
Factor 2
"ImPS/2 "
PS/2: "/dev/psaux"
unterstützt ab Release 3.4 ausschließlich die UGX und AGX G
OS
[2]: 2
______________________________________________________________
3. Inbetriebnahme
C
.
RAPHIC
ARD
3-42

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis