Assembly Instructions - Fuel LB 100 Benutzerhandbuch

ASSEMBLY INSTRUCTIONS

Step 2:
Pull the pad bracket upwards and move it to the left.
Move it a little forth and back in order to make sure, it is
securely locked.
Step 3:
Mount the handrails (114) on both sides as shown below
with each two screws M6*12 (75). If you want to fold your
treadmill later on, you first need to remove these handrails
again.
Step 1: Hold the upright frame
with right or left hand. Press down
the foot lever with foot or hand,
until you hear a click sound, then
lift the upright frame till you hear a
click sound again. Make sure the
upright frame is securely locked.
28