Using The Timer - Cooke & Lewis CLCER30 Handbuch

01
Heating zone operation
When the ON/OFF key (D) "
1. Select the cooking zone you wish to use by pressing the "
show or
2. Select the power level by pressing the "+" key (C) "
3. The power level will start at 0. Pressing the "+" will count up the power levels from 0 to 5 (max
power) in numerical order. Pressing the "–" key will take the power straight from 0 to 5. Pressing
the "–" key again will decrease the power level.
4. The zone button A and "0/H" will flash alternately for 20 seconds when the power is reduced
to zero.
5. The display will have a residual heat warning of "H" until the cooking zone has cooled to a
safe level.
6. To reuse the same cooking zone again, please follow the above steps.
Heating zone
02 Safety mode (Child lock)
• You can lock the controls to prevent unintended use by children.
• When the controls are locked, all the controls except the OFF control are disabled.
To lock the controls
Turn on the hob (D) "
To unlock the controls
1. Make sure the ceramic hob is turned on.
2. Touch and hold key (E) "
3. You can now start using your ceramic hob.
4. If you leave the hob locked and it switches off automatically, turn the hob back on using (D) "
and unlock using (E) "
WARNING: When the hob is in the lock mode, all the controls are disabled except OFF
which can still be used in an emergency.
03

Using the timer

You can use this function to switch off both cooking zones independently.
You can set the timer for up to 120 minutes.
1. Select the relevant cooking zone using (A) "
GLOA10298_200000011 V7c 3mm R.indd 33
" is pressed, all the indicators show "---".
accordingly.
Max. Power (230V~)
1800 W
1200 W
" and touch the key (E) "
" for 3 seconds to unlock.
" for 3 seconds.
" key (A). The display will either
" or "–" key (B) "
" for 3 seconds; the display will show "Loc".
" and select the required power level using (C).
33
".
"
10/05/2017 18:25