Operating Elements And Connections - Stageline LC-4LED Bedienungsanleitungen

All operating elements and connections can be
found on the fold-out page 3.
Contents
1 Operating Elements and Connections . . 11
2 Safety Notes . . . . . . . . . . . . . . . . . . . . . . . 12
3 Applications and Features . . . . . . . . . . . 13
4 Setting into Operation . . . . . . . . . . . . . . . 13
4.1 Connecting units . . . . . . . . . . . . . . . . . . . . . 13
4.2 Assigning the DMX addresses . . . . . . . . . . 14
4.2.1 Adjusting the DMX addresses
of the spotlights . . . . . . . . . . . . . . . . . . . . 14
4.2.2 Factory setting . . . . . . . . . . . . . . . . . . . . . 14
4.2.3 Manual assignment . . . . . . . . . . . . . . . . . 14
5 Operation . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.1 Stroboscope function with button STROBE 15
5.2 Memorizing and calling scenes . . . . . . . . . 15
5.2.1 Memorizing illumination scenes . . . . . . . 15
5.2.2. Calling scenes . . . . . . . . . . . . . . . . . . . . . 15
5.3 Programming and
playing sequences of scenes . . . . . . . . . . . 15
5.3.1 Programming a sequence of scenes . . . . 16
5.3.2 Playing a sequence of scenes . . . . . . . . 16
5.3.3 Deleting a sequence of scenes . . . . . . . . 16
5.3.4 Inserting or deleting a scene
in a sequence of scenes . . . . . . . . . . . . . 16
6 Specifications . . . . . . . . . . . . . . . . . . . . . . 17
1 Operating Elements
and Connections
1 Buttons FIXTURE to select and to deselect four
spotlights or four spotlight groups
2 Buttons SCENES to activate and deactivate illu-
mination scenes; button PAGE (10) allows to
switch between the scene memories 1 to 8
(page 1) and 9 to 16 (page 2)
3 Button RECORD to activate and deactivate the
programming mode to memorize individual
scenes or sequences of scenes
4 Button BLACKOUT: turns off the LEDs of the
connected units; when pressing the button once
again, the unit switches back to the previous
brightness
5 Button STROBE to activate and deactivate the
stroboscope function; the flash frequency can
be adjusted with control SPEED (17)
6 Buttons CHASES to play memorized sequences
of scenes; button PAGE (10) allows to switch
between the memories 1 to 8 (page 1) and 9 to
16 (page 2)
7 Controls RED, GREEN and BLUE to adjust the
brightness ratio between the red, green and
blue LEDs of the spotlights
The total brightness is adjusted with control
MASTER (9).
8 If one of these buttons is pressed, this corre-
sponds to the advance of the control above it to
maximum.
9 Control MASTER to adjust the total brightness
of the connected units; in the upper adjusting
range, the stroboscope function is activated
10 Button PAGE to switch between the scenes or
sequences of scenes 1 to 8 (page 1) and 9 to 16
(page 2)
If one of the buttons SCENES (2) is pressed
subsequently, a scene is called, or, if one of the
buttons CHASES (6) is pressed, a sequence of
scenes is called.
11 Button TAP SYNC to go to the next scene mem-
orized ( chapter 5.3.2)
12 Display: shows the number of the present scene
of a sequence of scenes (
13 LEDs to display the mode selected with button
MODE / UP (14) when a sequence of scenes is
executed
AUTO = The sequence of scenes is exe-
cuted at the speed adjusted with
control SPEED (17).
chapter 5.3)
GB
11