Grundig GSB 950 Handbuch Seite 23

CONNECTION
Use an HDMI cable (included) to connect the
soundbar's HDMI IN (1 or 2)
external devices (e.g. games consoles, DVD play-
ers and blu ray).
Use the OPTICAL Socket
▪
Remove the protective cap of the
socket, then connect an OPTICAL cable (in-
cluded) to the TV's OPTICAL OUT socket and
the OPTICAL socket on the unit.
Use the COAXIAL Socket
▪
You also can use the COAXIAL cable (not
included) to connect the TV's COAXIAL OUT
socket and COAXIAL socket on the unit.
▪
Tip: The unit may not be able to decode all
digital audio formats from the input source. In
this case, the unit will mute. This is NOT a de-
fect. Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player,
etc.) is set to PCM
the user manual of the input source device for
its audio setting details) with
CAL / COAXIAL
Use the AUX Socket
▪
Use a RCA to 3.5mm audio cable (not in-
cluded) to connect the TV's audio output sock-
AUX
ets to the socket on the unit.
▪
Use a 3.5mm to 3.5mm audio cable (in-
cluded) to connect the TV's or external audio
device headphone socket to the
on the unit.
Connect Power
Risk of product damage!
▪
Ensure that the power supply voltage corre-
sponds to the voltage printed on the back or
the underside of the unit.
▪
Before connecting the AC power cord, ensure
you have completed all other connections.
Soundbar
Connect the mains cable to the AC~ socket of
the main unit and then into a mains socket.
Subwoofer
----------------------------------------------------------------------------------------------------------------------
socket to your
OPTICAL
or Dolby Digital (Refer to
HDMI / OPTI-
input.
AUX socket
Connect the mains cable to the AC~ socket of
the Subwoofer and then into a mains socket.
Note:
▪
If there is no power, ensure the power cord
and plug are fully inserted and the power is
turned on.
▪
Power cord quantity and plug type vary by
regions.
Pair up with the subwoofer
NOTE:
▪
The subwoofer should be within 6 m of the
Soundbar in an open area (the closer the bet-
ter).
▪
Remove any objects between the subwoofer
and the Soundbar.
▪
If the wireless connection fails again, check if
there is a conflict or strong interference (e. g.
interference from an electronic device) around
the location. Remove these conflicts or strong
interferences and repeat the above proce-
dures.
▪
If the main unit is not connected with the sub-
woofer and it is in ON mode, the Pair Indicator
on the subwoofer will blink slowly.
ENGLISH
23