Troubleshooting; Is It Possible To Connect Several Toilets To The Same Line; What Kind Of Maintenance Is Required - Thetford Tecma DESIGN serie Aufstellungs- Und Gebrauchsanleitung

Any other commercial handle/mixer can alternatively be used to mix the water
The customer is free to select a wall mounted mixer from the same collection of the
bathroom and use it to control the bidet integrated in the toilet. In this case do not use the
mixer provided and install the mixer/handle that you prefer. Make sure to do the plumbing
right. In case of any doubt contact Tecma technicians.

4. TROUBLESHOOTING

Refer to the Troubleshooting available on the website:
5. F.A.Q.
5.1

Is it possible to connect several toilets to the same line?

Yes. In this case use "Y" connections instead of "T" connections. Always use vent valves. Fit
a proper pipe system based on the number of toilets used.
5.2

What kind of maintenance is required?

TECMA products do not need special maintenance or winterisation.
It is however suggested periodically and in preparation for the winter of:
• Perform maintenance of the solenoid valve and / or intake pump filters.
• Perform rinsing cycles with clean water.
• Completely empty all the systems to prevent the pipes from freezing or use a specific
antifreeze product.
Do not use automotive antifreeze products or products used in the windscreen washer
solvent tank.
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Design and Flexi Line | instructions for installation and use | ENG
Mixer OD 42 mm
Length 55 mm (chromed part)
www.thetfordmarine.com
70
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com