Thetford Tecma DESIGN serie Aufstellungs- Und Gebrauchsanleitung Seite 54

WARNING: do not to exceed the tank maximum level when the "Tank Level" LED is
red (lockout mode).
WARNING: If the toilet is connected to a seacock, make sure that its safety ball valve
is always closed when the boat is unattended, even for a short time.
WARNING: For toilets that use fresh water systems connected (even temporarily) to
the port water mains, make sure that the valve in the quay connection point is always
closed when the boat is unattended, even for a short time.
WARNING: do not force the cover to close if the toilet is equipped with a soft closing
system. The system is designed to close automatically and applying external force
may irreversibly damage the mechanism.
WARNING: if the toilet is equipped with a bidet function, make sure not to exceed
the toilet maximum level, as there is no overflow drain. Enable the macerator pump
("AFTER USE") to empty the toilet.
WARNING: In case of accidental overflow (bidet), you can use the "Manual
Activation" function (see 2.3.9).
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Design and Flexi Line | instructions for installation and use | ENG
54
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com