Thetford Tecma DESIGN serie Aufstellungs- Und Gebrauchsanleitung Seite 47

SAILING MODE: the toilet bowl remains empty at the end of the flush cycle
1. The bowl
is empty.
Set the system to mooring mode if you plan on docking for a long period of time. Water will
remain in the toilet after use allowing you to flush by pressing a single button.
MOORING MODE: water remains in the toilet, ready for the next use.
2. Using the
1. Some
toilet
water
remains in
the bowl
(same as a
residential
toilet).
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
2. Press the "BEFORE USE"
button before using the toilet.
The solenoid valve will let in
the desired amount of water
for max 12 seconds.
3. Press the "AFTER USE" button after
using the toilet.
The combined action of the solenoid
valve and macerator pump cleans and
rinses the bowl, leaving a small amount of
clean water ready for the next use.
Design and Flexi Line | instructions for installation and use | ENG
3. Press the "AFTER USE" button after
using the toilet.
A combined action of the solenoid valve
and macerator pump will clean and rinse
the bowl. A small water trap is created
and the toilet bowl will remain empty.
47
4. Some water
remains in the
bowl ready for
the next use
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com