Thetford Tecma DESIGN serie Aufstellungs- Und Gebrauchsanleitung Seite 57

described in section
admittance valve already in the discharge internal hose.
▪
In the case of non-centralized systems (sea water) with toilet installed below the
waterline, make sure the space to install the safety valve ventilation necessary
authorization and discharge at a sufficiently higher proportion to it.
▪
all the FLEXI LINE 2G SHORT SHALLOW BOWL versions self-
contain all components internally. It is no longer required to verify
the space under the usual installation step.
▪
The SHORT DEEP BOWL versions must have
enough room for the motor, which extends 100
mm below the bowl.
▪
The EVOLUTION model installation requires to install a vertical
fixing plate (not provided) or to suitably secure the load on the
bulkhead.
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Design and Flexi Line | instructions for installation and use | ENG
3.8 "System" The Flexi 2G and Design line integrates an air
57
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com