Service And Repair; Disposal; Battery Disposal - RIDGID micro IR-200 Bedienungsanleitung

micro IR-200 Non-Contact Infrared Thermometer
Remove the battery before any long period of storage or shipping
to avoid battery leakage.

Service and Repair

Improper service or repair can make the RIDGID micro IR-200
Non-Contact Infrared Thermometer unsafe to operate.
Service and repair of the micro IR-200 must be performed by a
RIDGID Independent Authorized Service Center.
For information on your nearest RIDGID Independent Service Cen-
ter or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com to find your local Ridge Tool contact point.
• Contact Ridge Tool Technical Service Department at rtctechser-
vices@emerson.com, or in the U.S. and Canada call (800) 519-
3456.

Disposal

Parts of the RIDGID micro IR-200 Non-Contact Infrared Thermo -
meter contain valuable materials and can be recycled. There are
companies that specialize in recycling that may be found locally.
Dispose of the com ponents in compliance with all applicable regu-
lations. Contact your local waste management authority for more
information.
12
WARNING
For EC Countries: Do not dispose of elec trical equip-
ment with household waste!
According to the European Guideline 2002/ 96/EC for
Waste Electrical and Electronic Equipment and its imple -
men tation into national legislation, electrical equipment
that is no longer usable must be collected separately and disposed
of in an environmentally correct manner.

Battery Disposal

For EC countries: Defective or used batteries must be recycled ac-
cording to the guideline 2006/66/EEC.
999-995-066.10_REV. D