Video Recording Mode - DIGMA FreeDrive 440 Bedienungsanleitung

6. MENU button
Settings menu button. Each dashcam mode (video, photo, playback) has two settings menu tabs. The
first tab is for customized settings for the current mode. The second tab is for system settings, which
are the same for all three modes. Therefore, common system options can be set from any of the three
modes. And customized settings for one mode can only be set from the corresponding mode.
Menu button additional function: in video recording mode, it locks the current file from being
overwritten.
Stop the video recording to enter the settings menu. Briefly press the MENU button. The list of menu
items for all three modes is provided below:
Video Recording Mode -> Video Recording Mode Settings:
Video resolution: video resolution settings in video recording mode.
Available values: FHD/1920х1080 (30 f/s), HD/1280х720 (60 f/s), HD/1280х720 (30 f/s),
WVGA/848х480 (30 f/s).
Recording cycle: duration of recorded video files. Values: Off, 3 min, 5 min, 10 min. When selecting
one of the time values, the recording will be made into files of specified length. When the memory is
full, new files will be recorded over the oldest ones.
WDR: Wide Dynamic Range It improves image quality at high contrast lighting: sharp difference
between dark (shade) and highly lighted areas (in the sun). Values: On, Off
G-sensor tracks changes in acceleration, both positive and negative (hard braking or hard
acceleration), thereby automatically identifying incidents and marking the current video file Read_
Only, which prevents it from being overwritten.* Values for sensor sensitivity settings: Off, High,
Medium, Low
* If files are locked from being overwritten, or if the G-sensor is switched on with the wrong settings,
the memory card may become full, and the dashcam will be unable to continue recording video. If this
happens, clear the memory card to continue normal operations