Playback Mode - DIGMA FreeDrive 440 Bedienungsanleitung

+1/3, +2/3, +1.0, +4/3, +5/3, +2.0.
Stabilization: image stabilization during handheld shooting (jitter). Values: ON/OFF
Stamp: switch on/off the date/time stamp—photo date and time information overlay on image.
Values: Off, Date, Date/Time.
Playback Mode -> Playback mode menu:
Delete: delete previously recorded video and photo files. Values: Delete one, Delete all.
Protection: enable/disable protection from overwriting for one or several files.
Values: Protect One, Disable One, Protect All, Disable All.
Slideshow: shows photos in slideshow mode with a delay specified in this item. Values: 2 s, 5 s, 8 s.
System settings (common):
Date/Time: Time/Date settings.
Auto shutoff: The dashcam automatically switches off after a set time when it is inactive. Values:
Off, 1 min, 3 min.
Button Sound: sound when buttons are pressed. Values: ON/OFF
Parking Mode: in this mode the switched off dashcam tracks the G-sensor status. As soon as the
dashcam (car) shakes enough to be detected by the G-sensor, the dashcam will switch on and start
video recording. Please note that in most vehicles the cigarette lighter power turns off when the
ignition key is in the OFF position. To ensure that this mode operates correctly, take additional
measures to providing the dashcam with uninterruptible power in parking mode.
Language: system language selection. Values: Russian, English.
AV output: selection of a color coding system for analog AV output. Values: PAL, NTSC.
Frequency: power frequency of lighting devices. This parameter can be used to stop flickering that
occurs during video shooting under artificial lighting. Values: Auto, 50 Hz, 60 Hz.
Formatting: MicroSD card formatting. All information will be deleted from the card.
Reset settings: reset all settings to factory settings (by default)
Software version: displays the dashcam's embedded software version.