DIGMA FreeDrive 440 Bedienungsanleitung Seite 11

7. Operation mode indicator
The red indicator is for power supply and battery charging, the blue indicator displays the dashcam
operation mode. The red indicator is on when the internal battery is charging. The indicator goes off
when the battery is fully charged. The indicator flashes during recording. When the recoding stops,
the blue indicator goes off.
9. Mode button
Dashcam mode switching button. When the button is briefly pressed, the dashcam will switch to one
of the following operation modes: Video -> Photo -> Playback.
10. Down button
Button for menu navigation down/microphone on/off/ZOOM-
11. UP button
Button for menu navigation Up/ ZOOM+
12. ОК button
Button for confirming a menu selection. Start/Stop recording in Video mode. Take a photo in Photo
mode.
13. MiniUSB interface
Connector for external power supply (included) or PC. When external power is available on connector 13 (or
when the holder is connected to the miniUSB holder connector), the dashcam will automatically switch on
and, if an SD card is installed, begin video recording. During recording, when external power is not available on
this connector, the dashcam will automatically stop recording and switch off. The dashcam can be switched
on/off manually using the Power button.
14. HDMI interface
Digital Video/Audio output for connection to a TV or monitor.