Troubleshooting - DIGMA FreeDrive 440 Bedienungsanleitung

BATTERY
Fully charged
Not fully charged
Low battery
Battery is discharged
The dashcam's built-in battery is not designed for it to operate continuously off-line and is only
used to ensure that the device's internal timer works and properly finishes a video recording when
the external power is interrupted. When external power is provided, the device indicator turns red.
The device shuts off automatically. The indicator turns green. If a memory card is installed in the
dashcam, video recording will begin. The blue indicator will start flashing. The in-built battery charges
when the external power supply is connected. The charge status is shown in the bottom right corner.

TROUBLESHOOTING

Problem: Cannot take a photo/video.
Possible solution: Check if there is enough free space on the TF card.
Problem: The video does not stop automatically.
Possible solution: Use a high-speed TF card compatible with SDHC. This TF card will be marked С6/
С10. The card must be formatted before use.