Inhaltsverzeichnis
Werbung
BUTTONS AND CONNECTORS
1. UP button
Menu navigation button Up.
2. Operation mode indicator
The red indicator is for power supply and battery charging, the blue indicator displays the dashcam
operation mode. The red indicator is on when the internal battery is charging. The indicator goes off
when the battery is fully charged. The indicator flashes during recording. When the recoding stops,
the blue indicator goes off.
3. MENU button
Settings menu button. Each dashcam mode (video, photo, playback) has two settings menu tabs. The
first tab is for customized settings for the current mode. The second tab is for system settings, which
are the same for all three modes. Therefore, common system options can be set from any of the three
modes. And customized settings for one mode can only be set from the corresponding mode.
Stop the video recording to enter the settings menu. Briefly press the MENU button. The list of menu
items for all three modes is provided below:
Video Recording Mode -> Video Recording Mode Settings:
Video resolution: video resolution settings in video recording mode.
Available values: 1920х1088 (30 f/s), 1280х720 (30 f/s), 640х480 (30 f/s)
Loop recording: duration of recorded video files. Values: Off, 1 min, 3 min, 5 min When Off is selected,
the recording will be made into one file until the memory is full, then the recording will stop. When
selecting one of the time values, the recording will be made into files of specified length. When the
memory is full, new files will be recorded over the oldest ones.
Exposure: manual adjustment of sensor light sensitivity. Values: -2.0, -5/3, -4/3, -1.0, -2/3, -1/3 0.0,
Werbung
Kapitel
Inhaltsverzeichnis
