Charging The Headset; Put On The Headset - Topcom butler 300 plus Gebrauchsanweisung

Topcom Butler 300+ Dect Headset

3. CHARGING THE HEADSET

Before you use the Butler 300+ Headset for the first
time, you must make sure that the batteries are
charged for 6-8 hours. The headset will not work
optimally if not properly charged!!
To charge the battery you have to put the power
adaptor jack into the headset charge socket(4) as
shown.
The RED indication LED will lit during charging. When
it starts to blink the battery is fully charged.

4. PUT ON THE HEADSET

• Press against the ear hook to move it further away from the headset as shown
• Put the headset with the ear hook behind the ear..
• Make sure the microphone is pointing towards your
mouth
Remark: The ear hook opening can be slightly bend to make it perfect fit
around the ear.
RIGHT OR LEFT
If you want to change the Headset to your other ear, you have to change the
orientation of the ear hook.
• Pull the ear hook from the headset as shown below.Turn the hook 180 degrees
4
4
Topcom Butler 300+ Dect Headset