Herunterladen Diese Seite drucken

De Fehlerbehebung; En Troubleshooting - Braun WK 5115 Bedienungsanleitung

Werbung

DE Fehlerbehebung

Problem
Der Wasserkocher schaltet sich
nicht automatisch ab, wenn das
Wasser kocht oder nachdem er
lange ausgeschaltet war.
Wasser spritzt aus der
Ausgussöffnung.
Der Wasserkocher schaltet sich
während des Kochvorgangs ab.

EN Troubleshooting

Problem
The kettle does not switch off
automatically after boiling or
long switch off time.
Water is splashing out of
the spout area.
The kettle is switching off during
operation.
For UK Only
Guarantee Information
All Braun Household products carry a minimum
guarantee period of two years. The rights and
benefits under this guarantee are additional to your
statutory rights which are not affected.
Fehler
Der Kalkfilter ist nicht eingesetzt.
Der Wasserkocher ist zu voll.
Der Kalkfilter ist nicht eingesetzt.
Kalkablagerungen an der
Heizplatte.
Die Abschalt-Automatik wurde
aktiviert, da nicht genug Wasser
eingefüllt wurde.
Cause
The scale filter is not inserted.
The kettle is overfilled.
The scale filter is not inserted.
Lime scale/mineral build up on
heating plate.
Auto off function has been activated
due to insufficient amount of water
in kettle.
Please keep your receipt as this will form the
basis of your guarantee.
In the unlikely event of a breakdown you have access
to professional help from our team simply by calling:
02392 392333
For service in the Republic of Ireland please call:
012475471
Lösung
Setzen Sie den Kalkfilter ein.
Achten Sie darauf, dass Sie
nicht über die Maximalangabe
Wasser einfüllen.
Setzen Sie den Kalkfilter ein.
Entkalken Sie das Gerät
regelmäßig.
Nehmen Sie Wasserkocher vom
Sockel. Lassen Sie das Gerät
abkühlen bevor Sie es erneut
füllen. Wenn das Gerät
abgekühlt ist, entriegelt sich der
Ein-/Ausschalter von selbst.
Achten Sie darauf, Wasser bis
oberhalb der 1-Tassen-
Markierung (0.25 l) einzufüllen.
Solution
Insert the scale filter properly.
Make sure not to exceed the
maximum filling level mark.
Insert the scale filter properly.
Descale the appliance regularly.
Remove the kettle from the
powerbase. Allow it to cool down
before refilling. When the kettle
has cooled down the switch will
reset itself. Make sure the water
level is above the 1-cup mark
(0.25 l).
9

Werbung

loading