Canon LBP-660 Bedienungsanleitung Seite 248

General Tab
The settings in this tab apply to the entire printer driver.
The LBP-660 does not support separator pages. Even if you click on the Separator Page
option button to setup a Separator Page, no separator page will be printed.
Do not alter the default settings in the Print Processor dialog box that appears when
you click on the Print Processor... button. If you change the Default Datatype, printing
from clients that are not running Microsoft Windows NT in particular will be not be
possible.
If you want to print a test page, click on the Print Test Page button in this tab. In the
Microsoft Windows Printing System for Microsoft Windows NT, the LBP-660 Status
Window does not contain a Test printer button.
Ports Tab
Use this tab to select the port to which the LBP-660 is connected.
If you have already connected the LBP-660 and are using it, there is no need to change this
setting.
Scheduling Tab
Use this tab to schedule a set time for printing, to set printing priorities, and to specify
the print data spooling method.
For the LBP-660, always select the "Spool print documents so program finishes printing
faster" option button. If you select the "Print directly to the printer" option, you will
not be able to print from applications.
Select the "Start printing after last page is spooled" option or the "Start printing
immediately" option as required. Note however that this option affects the operation of
the progress bar in the Status Window. See the "LBP-660 Status Window" section for
details.
Sharing Tab
This tab designates whether the LBP-660 is shared. See "Chapter 2 Installing the Microsoft
Windows Printing System" for details.
Security Tab
This tab sets the security for the LBP-660.
Refer to the Microsoft Windows NT manuals for information on printer security.
14 Using the Microsoft Windows Printing System Chapter 4