Microsoft Windows Nt - Canon LBP-660 Bedienungsanleitung

Microsoft Windows NT LBP-660 Status Window
If the LBP-660 is connected to a Microsoft Windows NT computer as a local printer, the
LBP-660 Status Window appears automatically when printing on the LBP-660 starts or
when user intervention is required, such as when an error occurs.
You can also open the LBP-660 Status Window at any time by double-clicking on the
Canon LBP-660 Status Window icon in the Windows Printing System group. You can then
use the Status Window to monitor the progress of your print jobs, pause printing, resume
printing, and so on.
This Status Window is basically the same as the Microsoft Windows Printing System Status
Window displayed in Microsoft Windows 95, Microsoft Windows 3.1 and Microsoft
Windows for Workgroups. Refer to the User's Manual for more information on using the
Status Window.
This description covers only those operations and functions where the LBP-660 Status
Window for Microsoft Windows NT differs from the Status Windows in other versions of
Microsoft Windows.
If you selected "Start printing after last page is spooled" in the Printer Properties
Scheduling tab, the estimated time remaining and the estimated completion time are
shown in the message area while a document is printing, and the progress bar shows the
number of pages printed and the total number of pages to be printed.
Chapter 4 Using the Microsoft Windows Printing System 19