Step 2B Insert - Belkin F5D9000 Bedienungsanleitung

Installing and Setting up the Card
Step 2B Insert
Insert the Card into an Available PCI Slot on your Desktop Computer
2B.1
Shut down your computer and disconnect your power cord.
2B.2
Remove the screws behind your computer case that secure the
computer cover and remove the cover.
Note: Touch any metal part of the case to discharge static
electricity to avoid damage to the product or your computer.
2B.3 Locate an empty PCI expansion
slot. It is usually white in color.
Confirm that the Card will fit into
the slot you have chosen. Keep
in mind that the included antenna
needs to be oriented with the top
pointing up. If there are cables and
other connectors in the way, try
to pick the PCI slot that has the
fewest obstructions to the correct
positioning of the antenna.
2B.4
Remove the metal port cover from
the back of the computer that
corresponds to the PCI slot you
selected. If there is a screw, put it
aside in a safe place, as you will be
using it to attach the Card to the
computer later.
2B.5
Push the Card firmly into the PCI slot
that you have chosen. Apply pressure
as needed until the connector is fully
seated.
2B.6
Now, secure the Card with the screw
that you put aside.
16 16