Herunterladen Inhalt Inhalt Diese Seite drucken

Zanussi ZAN3600 Handbuch Seite 2

Bodenstaubsauger
Vorschau ausblenden Andere Handbücher für ZAN3600:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
5
2
3
1
4
7
6
8
9
10
11
12
13
14
15
16
17
18
19
English
Accessories
(12.)
Extend the cord and plug it into the wall socket.
1
Dust bag
The vacuum cleaner has an integrated cord
winder. To rewind the cable press the foot pedal
2*
Telescopic tube
(take hold of the plug to prevent it striking you).
3*
Extension tube (2)
(13.)
Start the vacuum cleaner by rotating the power
4
Hose handle + hose
control button.
5
Carpet/hardfloor nozzle
(13./14.) Adjust suction power using the power control
6*
Parquet nozzle
button on the vacuum cleaner or the suction
7*
Turbo nozzle
control on the hose handle.
8
Combination nozzle
(15.)
A practical parking feature (as well as minimizing
the risk of breakage) makes things easier when
Safety precautions
pausing during cleaning.
(16.)
The parking feature makes it easier to move and
This appliance is not intended for use by persons (including
store the vacuum cleaner.
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
Use the nozzles as follows:
they have been given supervision or instruction concerning
Carpets: Use the carpet/hardfloor nozzle with the lever in
use of the appliance by a person responsible for their safety.
position (17). Reduce suction power for small carpets.
The vacuum cleaner features double insulation and does not
Hard floors: Use the carpet/hardfloor nozzle with the lever
need to be earthed.
in position (18).
Children should be supervised to ensure that they do not
Wooden floors: Use the parquet nozzle (certain models
play with the appliance.
only, 6).
Never vacuum:
Special combined nozzle: Detach the nozzle from the
In wet areas.
accessory dock and use it for bookshelves (with folding out
Close to ammable gases, etc.
of the „brush" end) or crevices, corners (with the „crevice"
Without a dust bag (this may damage the cleaner). A
end) (8.)
safety device is fitted which prevents the cover to close
Using the turbo nozzle
without a dust bag. Do not attempt to force cover to close.
(certain models only) (7a)
Sharp objects.
(19.)
Attach the nozzle to the tube.
Fluids (this can cause serious damage to the machine).
Note: Do not use the power or turbo nozzle on fur rugs, rugs
Hot or cold cinders, lit cigarette butts, etc.
with long fringes or a pile depth exceeding 15 mm. To avoid
Fine dust from plaster, concrete, or or ash, for example.
damaging the carpet, do not keep the nozzle stationary
The above can cause serious damage to the motor —
whilst the brush is rotating. Do not pass the nozzle across
damage which is not covered by the warranty.
electric cables, and be sure to switch off the vacuum cleaner
Electrical cable precautions:
immediately after use.
If the supply cord is damaged, it must be replaced by the
Replacing the dust bag/cleaning the filter
manufacturer, it's service agent or similary qualified
person in order to avoid a hazard. Damage to the
Changing the dust bag
cleaner cable will not be covered by the warranty.
The dust bag must be replaced latest when the indicator
Never pull or lift the vacuum cleaner by the cable.
window is completely red. Read with the nozzle lifted up
Disconnect the plug from the wall socket before cleaning
(20.).
or maintaining the vacuum cleaner.
1.
Open the lid.
Regularly check that the cable is not damaged. Never use
the vacuum cleaner if the cable is damaged.
2.
Push the dust bag holder backward (21.) and close
the bag by sliding tab (22.).
All service and repairs must be carried out by an authorised
3.
Lift out the dust bag (23.).
Electrolux service centre. Always keep the vacuum cleaner in
a dry place.
Beware: Lift out the bag carefully if it's completely full.
Before starting
4.
Insert the new dust bag from upside by pushing the
holder backward again.
(9.)
Check that the dust bag and motor filter are in
5.
Before closing the lid make sure the holder is in the
place.
forward position and the dust bag cardboard is
(10.)
Insert the hose until the catch clicks to engage
over the pipe-stub.
(press the catch to release the hose).
(11.)
Attach the extension wand or telescopic wand (only
on certain models) to the hose handle and oor
nozzle (to take them apart again, twist and pull).
1
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Zan3610Zan3615Zan3625Zan3626Zan3630

Inhaltsverzeichnis