Charge Mode; General; Setting Of The Charging Parameters - Elektron VAS 622 009 Bedienungsanleitung

General

The charger is operated in „Charge Mode
bility to adapt the charging parameters to the battery to be charged.

Setting of the Charging Parameters

After disconnecting the mains or switching on the charger by the "On / Off" button, the following standard
parameters are preset:

Battery voltage: 12 V

Battery type: Wet

End-of-charge voltage: 14,4 V (Gassing voltage)

De-Sulphating: Off

Language: German
The charging parameters can be adjusted as needed:
Preconditions:
1. The charger is connected to mains.
2. The charger is not connected to a battery.
3. The charger is in Charge Mode .
Procedure:
1. Press for 5 seconds the gearwheel in the right bottom corner. This will open the "Service" menu
for setting the charging parameters.
Illustration 4: Display in „Charge Mode"
2. Battery voltage and -type can be adapted to the battery to be charged now.

Battery voltage: 12 V, 24 V

Battery type: Wet (Calcium, EFB), Gel, AGM, Li
EN

Charge Mode

hen batteries should be charged. Here the user has the possi-
Illustration 5: Display in "Service"-Menu
Charge Mode 7