Hama 00040095 Bedienungsanleitung Seite 6

"Punch through"
The punch through function lets you execute
specifi c functions on a device type other
than the one that is selected. These are the
volume, mute, and playback functions.
When the remote control is set to AUX, VCR,
or DVD mode, the Volume (7) and Mute (17)
buttons control the TV device (provided the
other devices do not have their own volume
control).
In TV mode or another mode without
playback functions, the Play, Pause, Stop and
(where applicable) Record buttons control
a connected video recorder, DVD player,
or DVD recorder. The controlled device is
always the last selected device.
By default, the universal remote control is
set so that the volume and mute functions
automatically control the TV set when a
source button for a video device (DVD, video
recorder, etc.) is being pressed.
Programming volume/mute to a different
device type
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press a source button for the device to
which the volume and mute functions are
to be transferred. The red LED stays on.
• Press the Mute (17) button; the red LED
goes out.
• If you accidentally select a device which
does not have its own volume control, the
red LED fl ashes for 3 seconds.
10
Programming volume/mute to a specifi c
device type
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press the source button for the device
which is only to have its own volume and
mute functions.
• Press the "-" Volume (7) buttons; the red
LED stays on.
• Press the Mute (17) button again; the red
LED goes out.
Resetting volume/mute
If you have changed the volume and mute
as described in the previous two sections,
you can reset these functions to their factory
settings and thereby restore the "punch
through" function.
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press the Mute (17) button again; the red
LED goes out.
The volume and mute "punch through"
functions are now returned to their default
state.
Debugging
The remote control does not function:
• Check the batteries of the remote control
are correctly inserted and the polarity
+/- is right
• Check your devices are correctly
connected and turned on.
• If the batteries are too weak, you
exchange these through new.
• Several device codes are performed
under the brand name of my device. How
do I determine the correct device code?
• In order to determine the correct
device code for your device, you try out
the codes after each other until most
functions of the device function properly.
The devices react only to some commands of
the remote control:
• You test further codes, to which according
to devices by the commands react.
• If the manual code input and the
automatic code search do not lead to
the success, it can happen in special
individual cases that the device is not
compatible to your universal remote
control.
11