Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
CONNECTING THE BRACKETS
INSTRUCTIONS
Step 1
Parts
(x6) I (bracket) [x8 for Kit2]
(x12) L (75 mm screw)
(x12) J (nut)
1. Place the largest
Toolbox to be attached on the van
floor.
2. Determine the position (height) for
connecting the bottom Brackets.
3. Connect the Brackets to both rack
supports, verifying they are at the
same height.
Connecting the Brackets to the
narrower top profile, should be
done via the inserted spacers.
4. Determine the heights, and connect
the remaining set of Brackets
according to the size, position
and distribution of the remaining
Boxes.
5. Mount the
the rack Brackets, and verify they
fit securely.
Note: If needed, brackets and
crossbars can be repositioned,
taking into account the
aforementioned restrictions..
14
STEP 1
ACTION
Boxes on
END RESULT
K
d
d
Werbung
Inhaltsverzeichnis
